The very popular and ever dependent HSP range has been powering various makes of forklifts for more than two decades. The HSP range is available in BS and DIN range from 58Ah to 841 Ah in BS and 120Ah to 1400Ah in DIN. Available in both British and Continental standards, the HSP range can fit into all the makes of forklifts.
EIL Traction Gel batteries are valve regulated, maintenance free batteries, unlike conventional batteries with liquid electrolyte they have immobilized electrolyte (Gelled sulphuric acid). Instead of a vent plug, a valve is used to regulate the internal gas pressure, preventing the ingress of oxygen from the air and allowing the escape of excess charging gasses. When operating valveregulated leadacid batteries the same safety requirements as for vented cells apply, to protect against hazards from electric current, from explosion of electrolytic gas and - with some limitations - from the corrosive electrolyte. Battery valves should never be removed.
These batteries do not require topping up with distilled or demineralized water.
Bolt-On Terminals mark a significant advance over weld-on terminals in all respects. The multiple benefits
Imported Bolt-On Terminals with Brass inserts provide better electrical performance.
Replacement of connectors, Taken-off or other accessories associated with the battery is easier, less messy and can be accomplished quicker.
Bolt-On technology prevents wear and tear of the terminals which was unavoidable in weld-on terminals.
Bolt-On pillars are used with imported Technology Grommets which are designed to arrest acid seepage, prevent terminal corrosion and also nullify the effect of plate growth.
Auto fill
Accurate and timely topping up with no Under-watering. Water is lost from the electrolyte primarily through evaporation and electrolysis (gassing) during charging. Due to this water loss, there is a chance of the plate being exposed to air, which over a period of time can lead to hard Sulphate formation on the plate thereby reducing life and capacity.
Auto Fill Proper topping-up of batteries is essential for maintaining them in perfect health. So far, manual topping-up was the norm. The Auto Fill system changes the parameters, principally Auto Fill ensures -
Accurate topping-up with no 'Over-watering' When a battery is over-filled, there is both electrolyte loss because of overflow as well as electrolyte dilution which may develop a leakage path between connectors and ground and messy battery top.
Advantages
100 % absence of manual labour eliminates human error
No chance of contamination 20 % increase in battery life.
Automatic topping
Epoxy CoatingEpoxy properties
Prevention from leakage current
Tough & semi flexible coating (tolerant to substrate expansion and contraction)
Inverter Battery Load Calculator
